Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WED5220LR Vented Electric Dryer Repair in San Francisco
Long-vent electric dryer where no heat or damp loads usually start with the vent and heating element.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WED5220LR
About this model
Model overview
The WED5220LR is a Whirlpool 7.4 cubic-foot electric dryer, 27 inches wide and 30 5/8 inches deep, built to run on 240-volt power with a minimum 30-amp circuit. Its long-vent design is listed with a 160-foot maximum vent length, which suits a laundry room far from an outside wall. Owners in the Bay Area usually raise no heat, damp loads, or a cycle that stops early. Booking notes should include the symptom, the rating-label number copied whole, and whether the 30-amp supply was checked. Confirm the outlet type matches the dryer before any repair.
Specifications
| Dimensions | Width is 27 inches. Depth is 30 5/8 inches. |
|---|---|
| Capacity | Drum capacity is 7.4 cubic feet. |
| Power | The electric version operates on 240-volt AC power. Minimum circuit rating is 30 amps. |
| Features | The drum is powder coated. |
| Controls | Twelve drying cycles are listed. Cycle selection uses knob controls. |
What sets the WED5220LR apart
A 160-foot maximum vent length is the feature that separates this dryer from a standard vented model. Twelve drying cycles are chosen with a knob, so the settings stay visible without a display. The drum is powder coated, and the cabinet depth is listed at 30 5/8 inches.
What owners notice
- No heat or overheating.
- Clothes still damp after a full cycle.
- Squealing, thumping or grinding.
- Cycle ends too early.
Service notes for the WED5220LR
No heat on this electric dryer is checked at the heating element, the thermal fuse and the high-limit thermostat, which a technician tests with the power off. A long vent run that restricts airflow causes overheating and slow drying, so the owner should check the vent for lint and kinks. Squealing or thumping is traced to the drum roller or the idler pulley. The 240-volt supply is confirmed with a meter before any part is replaced. Long runs also need the exhaust outlet inspected at the wall.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
The electric version runs on 240-volt AC power with a minimum 30-amp circuit.
Twelve drying cycles are listed, selected with knob controls.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California