Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Specialized Whirlpool Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
A registered 8.8 cubic-foot vented dryer with steam and sanitize options, where no-heat faults come up often.
The WED8510FW is a Whirlpool vented electric dryer with a registered drum capacity of 8.8 cubic feet and a width of 29 inches. The recorded Combined Energy Factor is 3.93, and the registration record includes steam and sanitization cycles. Around San Francisco, owners of this dryer usually report no heat, a drum that does not turn, or squealing. A time-remaining display and a filter indicator are part of the panel, so note what the display showed. In the booking form, record the symptom, any time-remaining or filter reading, and the full rating-label number with its suffix copied.
| Dimensions | Registered width is 29 inches. |
|---|---|
| Capacity | Registered drum capacity is 8.8 cubic feet. |
| Power | Estimated annual electricity use is 608 kWh. |
| Features | The certification record includes a steam cycle. The registered feature set includes a sanitization cycle. |
| Controls | A time-remaining display and filter-cleaning indicator are listed. |
| Ratings and listings | The recorded Combined Energy Factor is 3.93. The October 2025 NHSaves list includes WED8510FW* under ENERGY STAR ID 2282560. |
Registered steam and sanitization cycles are the main feature set beyond basic drying, which sets this dryer apart from a plain vented model. A time-remaining display and a filter-cleaning indicator give ongoing guidance during each run. The Combined Energy Factor of 3.93 pairs with an estimated 608 kWh of annual use, a figure useful when comparing running costs across dryers.
No heat on this dryer is checked at the heating element and thermal fuse first, since the registered steam and sanitization options share the same heat path. A drum that does not turn is checked at the belt and rollers, and a technician reaches them after the front panel comes off. Squealing or thumping is traced to the idler pulley. The filter-cleaning indicator should be reset only after the lint screen and exhaust duct are cleared, which the owner can do before the visit. Unplug the dryer before any test, and do not run it with the filter removed.
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
The estimated annual electricity use is 608 kWh.
Yes, the registered feature set lists a steam cycle.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.