Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WED9500EC Vented Electric Dryer Repair in San Francisco
Large-capacity steam dryer owners often report squealing or a load that finishes earlier than the setting says.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WED9500EC
About this model
Model overview
The Whirlpool WED9500EC is a 9.2 cubic foot steam electric dryer in a cabinet 29 inches wide and 33 1/2 inches deep. The stainless-steel drum sits behind a reversible door with a viewing window, so a load can be watched without opening it. Steam Refresh reduces wrinkles and odors without washing, and Intuitive Touch controls remember previous settings. The dryer needs a 240-volt, 30-amp supply. Among owners in the Bay Area, the usual complaints are squealing, an early finish, or a drum that will not turn. Add the symptom, the complete rating-label number and any panel code to the booking form.
Specifications
| Dimensions | Width is 29 inches. Depth is 33 1/2 inches. |
|---|---|
| Capacity | Drum capacity is 9.2 cubic feet. |
| Power | Electrical service is 240 VAC, 60 Hz, 30 amps. |
| Features | The drum is stainless steel. The door is reversible and has a viewing window. Steam Refresh reduces wrinkles and odors without washing. |
| Controls | Intuitive Touch controls remember previous settings. |
What sets the WED9500EC apart
The 9.2 cubic foot drum is the capacity that defines this model, and it sits in a 29-inch cabinet rather than a narrower one. Steam Refresh and the viewing window are the two extras an owner notices most. The remembered settings keep the same program for each load. Day to day, the larger drum takes bulky loads, so the load size matters more than the setting.
What owners notice
- Squealing, thumping or grinding.
- Cycle ends too early.
- Drum not turning.
- Clothes still damp after a full cycle.
Service notes for the WED9500EC
A squeal, thump or grinding noise is traced to the drum rollers and belt before any other part. A cycle that ends early is checked at the sensors, because the finish depends on their readings. A drum that will not turn points to the belt, the drive motor or the drum support. Damp clothes after a full cycle in a large drum often mean the load is above the advised size, so the technician checks the moisture sensing and the heating together. Before calling, an owner can check the door seal around the viewing window, avoid overloading the drum, and clear the lint screen.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
The cabinet is 33 1/2 inches deep and 29 inches wide.
Yes, the reversible door has a viewing window.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California