Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WED99HED Ventless Electric Heat-Pump Dryer Repair in San Francisco
A ventless heat-pump dryer where drum rotation and damp loads are the usual complaints.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WED99HED
About this model
Model overview
The WED99HED is a Whirlpool ventless electric heat-pump dryer with a 7.3 cubic-foot stainless-steel drum, 27 inches wide and 31 3/4 inches deep. Heat-pump drying recirculates warm air inside the cabinet, so the unit needs no exterior connection and fits laundry rooms that lack an outside opening. Calls about this heat-pump model in the Bay Area center on damp clothes, a drum that will not turn, or a cycle that finishes early. Booking entries should state the symptom, the time shown on the display, and the full rating-label number, extra characters included, so the technician sees the exact unit.
Specifications
| Dimensions | Width is 27 inches. Depth is 31 3/4 inches. |
|---|---|
| Capacity | Drum capacity is 7.3 cubic feet. |
| Features | Drying uses ventless heat-pump technology. The drum is stainless steel. |
| Controls | Eight drying cycles are available. Four temperature selections are offered: Extra Low, Low, Medium and High. The display shows time remaining. |
| Ratings and listings | The qualifying-products list identifies this model as ENERGY STAR qualified. |
What sets the WED99HED apart
A full-size 7.3 cubic-foot heat-pump drum is the core of this model, giving it real capacity for a ventless unit. Eight drying cycles and four temperature selections, from Extra Low through High, let an owner match heat to delicate fabrics. The display counts down time remaining, so a load can be timed without guessing when it finishes. The stainless drum is part of the design.
What owners notice
- Drum not turning.
- Clothes still damp after a full cycle.
- Squealing, thumping or grinding.
- Cycle ends too early.
Service notes for the WED99HED
On a heat-pump dryer, a drum that will not turn is tested at the drive belt and the drum support rollers, and a technician removes the front panel to reach them. Clothes that remain damp are often traced to the heat-pump circuit or to the condensate collection, so the owner should empty the collection container after each run. Squealing or grinding usually comes from the rollers or the idler pulley. A cycle that stops early can be a sensor reading or a full condensate container, so check the display before calling.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
No, it is ventless and uses heat-pump technology, so no outside connection is required.
Its depth is 31 3/4 inches with 27 inches of width.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California