Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WGD9500EC Vented Gas Dryer Repair in San Francisco
Steam gas dryer with touch controls where drum rotation and no-heat calls are the main concerns.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WGD9500EC
About this model
Model overview
The WGD9500EC is a Whirlpool vented gas dryer, 29 inches wide, with a stainless-steel drum and a side-swing door that can be reversed. Gas models run on 120-volt, 60-Hz service, and the Intuitive Touch controls remember the last cycle and its settings. Calls from San Francisco for this model tend to be about a drum that stops, no heat, or a cycle that quits early. Note any touch panel message, and copy the rating label number with its extra characters, so the technician has the full identification on record.
Specifications
| Dimensions | Width is 29 inches. |
|---|---|
| Power | Gas models require 120-volt AC, 60-Hz electrical service. |
| Features | Three sensors track moisture and temperature to adjust drying time. The drum is stainless steel. The side-swing door can be reversed. Steam Refresh reduces wrinkles and odors without washing. |
| Controls | Intuitive Touch controls remember the previous cycle and settings. A countdown display shows estimated time remaining. |
What sets the WGD9500EC apart
Steam Refresh and three-sensor drying are the core of this gas dryer, and the countdown display shows estimated time remaining. The side-swing door reverses for installation flexibility, which matters in a tight laundry nook. Intuitive Touch controls keep previous settings, so the next load starts with the same program.
What owners notice
- Drum not turning.
- No heat or overheating.
- Cycle ends too early.
- Squealing, thumping or grinding.
Service notes for the WGD9500EC
Drum rotation trouble on a gas dryer starts at the drive belt, the drum support roller and the drive motor, and a technician removes the front panel to test them. No heat is traced to the gas valve, the igniter and the flame sensor, and the owner should turn off the gas supply before any inside look. Squealing or grinding is a roller or idler problem. A cycle that ends early often comes from a sensor reading, so note the countdown on the display before calling.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
Yes, the side-swing door can be reversed.
It shows the estimated time remaining in the cycle.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California