Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WHD560CH Ventless Electric Heat-Pump Dryer Repair in San Francisco
Ventless heat-pump dryer owners often find a cycle that ends too soon or a drum that has stopped turning.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WHD560CH
About this model
Model overview
The Whirlpool WHD560CH is a 27-inch front-load heat-pump dryer with a 7.4 cubic foot powder-coated drum. Its hybrid heat-pump design dries without an external exhaust, so no outdoor connection is needed. It runs on a 240-volt, 60 Hz supply, and the side-swing door can be reversed. Eco and Speed options give two ways to run a load. Owners around the Bay Area most often report a cycle that ends early, a drum that will not turn, or a squeal. The white finish is WHD560CHW. Note the symptom, the model string printed on the rating label, and the panel code, if any, in the booking form.
Specifications
| Dimensions | Width is 27 inches. |
|---|---|
| Capacity | Drum capacity is 7.4 cubic feet. |
| Power | Electrical supply is 240 volts, 60 Hz. |
| Features | Drying uses hybrid heat-pump technology without external exhaust venting. The drum is powder coated. The side-swing door is reversible. |
| Controls | Eco and Speed options are provided. |
| Finish | WHD560CHW has a white finish. |
What sets the WHD560CH apart
Hybrid heat-pump drying is the main difference, since the unit recovers heat inside the cabinet instead of relying on an outdoor connection. The Eco and Speed options split the daily choices, and the powder-coated drum is the part to keep clean with mild products. The reversible door lets the opening suit a tight room. Day to day, expect the cycle to run on the heat-pump schedule rather than a fixed heater.
What owners notice
- Cycle ends too early.
- Drum not turning.
- Squealing, thumping or grinding.
- No heat or overheating.
Service notes for the WHD560CH
A cycle that ends too early is checked at the moisture sensing and the heat-pump control, because a hybrid unit finishes on its own readings. No heat is traced to the heat-pump components and the heating path, with the 240-volt supply confirmed at the outlet. A drum that will not turn is a belt, roller or motor question, checked with power off. Squealing or thumping points to the same rollers. An owner can clear the lint filter, confirm the door seal is intact, and note whether the Eco or Speed option was selected when the problem started.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
It runs on a 240-volt, 60 Hz supply.
No, the hybrid heat-pump design dries without an external exhaust, so no outdoor connection is needed.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California