Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WGD6620H Vented Gas Dryer Repair in San Francisco
Vented gas dryer where squealing, a stalled drum or early stops are the usual service notes.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WGD6620H
About this model
Model overview
The WGD6620H is a Whirlpool vented gas dryer with a 7.4 cu. ft. drum, 27 inches wide and 31 inches deep. Gas models operate on 120-volt AC, 60-Hz power and need at least a 15-amp circuit, so the electrical supply is worth checking early in any complaint. Steam Refresh and steam wrinkle protection are built in, and the wrinkle protection can keep tumbling for up to 150 minutes. Calls from the Bay Area on this model usually concern squealing, a drum that stops, or laundry left damp. Booking notes should list the symptom and the complete rating-label number with its extra characters, copied exactly.
Specifications
| Dimensions | Width is 27 inches. Depth is 31 inches. |
|---|---|
| Capacity | Drum capacity is 7.4 cubic feet. |
| Power | Gas models use a 120-volt AC, 60-Hz electrical supply. Minimum circuit rating for gas models is 15 amps. |
| Features | Steam Refresh uses water and heat to reduce wrinkles and odors. Steam wrinkle protection continues tumbling for up to 150 minutes. |
| Controls | Intuitive Controls support customized cycle combinations. |
What sets the WGD6620H apart
Steam Refresh and Intuitive Controls with customized cycle combinations set this gas dryer apart. Steam wrinkle protection suits work shirts and dresses that would otherwise need pressing. The 15-amp minimum circuit rating applies to the gas version, so it should be confirmed before the dryer is moved into a new space.
What owners notice
- Squealing, thumping or grinding.
- Drum not turning.
- Cycle ends too early.
- Clothes still damp after a full cycle.
Service notes for the WGD6620H
Squealing, thumping or grinding on a gas dryer usually points to a worn drum support roller, an idler pulley or a glazed drive belt, and a technician checks those first. The owner can safely clean the lint screen and turn the drum by hand with the door open to feel for binding. A drum that will not turn is traced to the drive motor and belt. Damp clothes or a cycle that ends early are reviewed against the moisture sensing and the burner flame, because a weak flame makes the heating stage end sooner than expected.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
A gas model needs a minimum 15-amp circuit rating and a 120-volt AC, 60-Hz supply.
Wrinkle protection keeps tumbling for up to 150 minutes after the cycle.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California