Whirlpool Compact Heat Pump Dryer FE Error Code
FE is a power source problem on compact heat pump dryers; check the outlet first.
Model Reference
Whirlpool WED87HED Vented Electric Dryer Repair in San Francisco
A stackable vented dryer with a short steam refresh cycle, where squealing and early stops are common calls.
- 10 appliance guides
- 102 model pages
- 486 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
WED87HED
About this model
Model overview
The WED87HED is a Whirlpool stackable vented electric dryer, 27 inches wide, with a 22-minute Steam Refresh cycle and Wrinkle Shield Plus with steam for up to 150 minutes. Three sensors monitor air temperature and load moisture, and an LED display counts down the estimated time remaining. Bay Area owners of this model most often describe squealing, a dryer that finishes early, or damp clothes. The booking entry should hold the symptom, the time left on the display, and the rating-label number, complete with extra letters or digits after the base.
Specifications
| Dimensions | Width is 27 inches. |
|---|---|
| Features | Three sensors monitor air temperatures and load moisture. Four baffles promote balanced tumbling. Steam Refresh uses water and heat for a 22-minute refresh cycle. Wrinkle Shield Plus with steam operates for up to 150 minutes. |
| Controls | Tap Touch memory recalls the previous cycle and settings. An LED display counts down estimated time remaining. |
| Ratings and listings | The October 2025 NHSaves list includes WED87HED*+ under ENERGY STAR IDs 2266016 and 2266020. |
What sets the WED87HED apart
The 22-minute Steam Refresh cycle is a short, dedicated option for freshening a load without a full run. Wrinkle Shield Plus with steam can run for up to 150 minutes, and Tap Touch memory recalls the previous cycle and its settings. Four baffles promote balanced tumbling, and the LED countdown shows how much time is left in the run.
What owners notice
- Clothes still damp after a full cycle.
- Cycle ends too early.
- Squealing, thumping or grinding.
- Drum not turning.
Service notes for the WED87HED
Noises that squeal, thump or grind are checked at the drum rollers and the idler pulley, and a technician removes the front panel to reach them. A drum that will not turn points to the drive belt. Cycles that end early are compared against the three sensors and the lint filter path. Damp clothes after a full run are traced to the moisture bars and the exhaust duct. Before any internal work, the owner should unplug the dryer, clear the lint screen and check that the steam option was not interrupted by a door opening mid-cycle.
Booking
We confirm the full model number, test the parts linked to the symptom and give a written estimate. Nothing is repaired without your approval. Related pages: Whirlpool Dryer Repair in San Francisco and Whirlpool Dryers.
Frequently asked questions
The Steam Refresh cycle is a 22-minute refresh.
It measures 27 inches wide.
Check the rating label around the door opening or on the back panel. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Gas, electric and ventless Whirlpool dryers diagnosed across San Francisco and the Bay Area, with a written estimate before any repair begins.
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 687-4102
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California